KLA Corporation (KLAC) Q3 2023 Earnings Call
KLA Corporation (NASDAQ:KLAC) Q3 2023 Earnings Conference Call April 26, 2023 5:00 PM ET
Company Participants
Kevin Kessel - Vice President, Investor Relations & Market Analytics
Rick Wallace - Chief Executive Officer
Bren Higgins - Chief Financial Officer
Conference Call Participants
Harlan Sur - JPMorgan
C.J. Muse - Evercore
Vivek Arya - Bank of America Securities
Krish Sankar - Cowen
Joe Quatrochi - Wells Fargo
Atif Malik - Citi
Timothy Arcuri - UBS
Sidney Ho - Deutsche Bank
Toshiya Hari - Goldman Sachs
Joe Moore - Morgan Stanley
Blayne Curtis - Barclays
Brian Chin - Stifel
Mehdi Hosseini - SIG
Operator
Good afternoon. My name is Chelsea, and I will be your conference operator today. At this time, I would like to welcome everyone to the KLA Corporation March Quarter 2023 Earnings Conference Call and Webcast. All participant lines have been placed in a listen-only mode to prevent any background noise. After the speakers’ remarks, there will be a question-and-answer session. [Operator Instructions]
Thank you. I will now turn the call over to Kevin Kessel, Vice President of Investor Relations and Market Analytics. Please go ahead.
Kevin Kessel
Thank you, Chelsea, and thank you for joining us for our earnings call to discuss the results of the March 2023 quarter and our June quarter outlook. Joining me is Rick Wallace, our Chief Executive Officer; and Bren Higgins, our Chief Financial Officer.
During this call, we will discuss our results released today after the market closed. All materials can be found on our IR website. Today's discussion is being presented on a non-GAAP financial basis unless otherwise specified. Whenever we make full year references, they are for calendar years.
A detailed reconciliation of GAAP to non-GAAP results is in the earnings materials posted on our website. Our IR website also contains future investor events as well as presentations, corporate governance information and linked to our SEC filings, including our most recent annual and quarterly reports on Forms 10-K and 10-Q. Our commentary is subject to risks and uncertainties reflected in the risk factor disclosure in our SEC filings.
Any forward-looking statements, including those we make on the call today, are also subject to those risks, and KLA cannot guarantee those forward-looking statements will come true. Our actual results may differ significantly from those projected in our forward-looking statements.
Our CEO, Rick Wallace, will begin the call with some comments and quarterly highlights. Bren Higgins, our CFO, will conclude with our financial highlights, including our guidance and our outlook.
I will now turn the call over to our CEO, Rick Wallace. Rick?
Rick Wallace
Thank you, Kevin. Let's start with a summary of KLA's performance in the quarter, along with a few highlights. Further color and detail on my comments and the semiconductor demand environment can be found in our shareholder letter released earlier today. KLA's March quarter results again demonstrate the company's consistency in delivering on long-term strategic objectives and financial targets. Specifically, revenue of $2.43 billion was above the midpoint of the guidance range. This represented 6% growth on a year-over-year basis, although down 18% sequentially. GAAP EPS was $5.03 and non-GAAP EPS was $5.49, with each finishing above the midpoint of their respective guidance ranges.
From a customer perspective, demand in the quarter was slightly ahead of expectations. Near-term headwinds related to the global macro economy and supply chain remain, but we also see positive outsets emerging as automotive demand and other markets served by legacy notes remain strong. Additionally, the silicon wafer industry continues to invest to support long-term wafer demand growth.
Our customers are adjusting capacity plans across both foundry/logic and memory due to changing demand expectations. However, we see R&D investments remain a top priority. This is important for KLA as our products are consistently relied upon during the R&D process, as well as the early ramp phase and faster time yield is critical.
We had a number of additional business highlights in the quarter. Gartner recently released their latest industry market share analysis and process control is the fastest growing WFE market in 2022, growing 30% in the year to $13.5 billion. Within process control, KLA increased market leadership in most segments, resulting in an overall market share gain of approximately 300 basis points in 2022 to over 57% greater than 4x our nearest competitor. KLA's sustained market leadership is underpinned by our innovation and commitment to high levels of R&D investment.
Additionally, the successful execution of KLA's strategies for market diversification were demonstrated by the rapid growth in KLA's automotive-focused businesses. Automotive semiconductor demand is growing in applications where a zero-defect mentality is required to achieve superior standards of quality and reliability. KLA has been working with the entire automotive ecosystem to standardize our in-line defect screening methodology called I-PAT to augment existing reliability test methods.
As electrification proliferates, the industry is facing an additional opportunity with the integration of -- introduction of new compound semiconductor materials, such as silicon carbide, that offer a significant improvement in power efficiency over silicon. In this category, KLA's revenue has grown 2.5x since 2019, approaching $700 million in annual revenue in calendar 2022 and including 5x growth in silicon carbide-related businesses, which account for almost half of total automotive sales. We expect this growth to continue in calendar 2023.
In Services, our business grew to $529 million in the quarter, up 8% year-over-year and 2% sequentially. KLA Service strength was driven by our growing installed base, increasing customer adoption of long-term service agreements, expanding service opportunities and legacy nodes and emerging long-term opportunities in acquired businesses.
And finally, the March quarter was another excellent period from a cash flow and capital returns perspective, Quarterly free cash flow was $926 million, which drove the latest 12-month free cash flow up 20% to $3.2 billion. Total capital returns over the past 12 months was $5.11 billion or 160% of free cash flow.
Dividends and share repurchases in the March quarter were $659 million, composed of $478 million in share repurchases and $181 million in dividends. Our consistent execution despite challenges in the marketplace, continue to prove the resiliency of the KLA operating model and the dedication of our global teams.
I will now hand the call over to Bren to go through our financial highlights. Bren?
Bren Higgins
Thank you, Rick. KLA delivered on our quarter guidance and commitments, demonstrating consistent execution in a challenging marketplace. Our continued focus on meeting customer needs while expanding market leadership, growing revenue, sustaining industry-leading gross and operating margins, generating strong free cash flow and maintaining our long-term strategy of asserted capital allocation is what makes us successful.
Quarterly revenue was $2.43 billion, above the midpoint of the guided range of $2.2 billion to $2.5 billion. Non-GAAP diluted EPS was $5.49 above the midpoint of the guided range of $4.52 to $5.92. GAAP diluted EPS was $5.03.
Non-GAAP gross margin was 60.8%, at the lower end of the guidance range. While volume and product mix were stronger than expected, persistent end market weakness continues to affect the PCB and display in component inspection businesses to a greater degree than expected and drove incremental inventory reserve requirements.
Factory under-absorption also remains a factor across the company as we adjust our capacity down to reflect the current business environment. These issues combined diluted gross margins by approximately 100 basis points and offset the volume and product mix benefits mentioned earlier.
Non-GAAP operating expenses were $534 million, below our expectation of $545 million, reflecting the impact of modest headcount reductions implemented in the quarter and prudent cost management across the company.
Total operating expenses comprised $322 million in R&D and $212 million in SG&A. Non-GAAP operating margin was 38.8%. Other income and expense net was $60 million, and the quarterly effective tax rate was 14%. At the guided tax rate of 13.5%, non-GAAP EPS would have been $0.03 higher or $5.52.
Quarterly non-GAAP net income was $761 million. GAAP net income was $698 million. Cash flow from operations was $1.01 billion, and free cash flow was $926 million. As a result, free cash flow conversion was 122%, and free cash flow margin was 38%. The company had approximately 139 million diluted weighted average shares outstanding at the end of the quarter. The breakdown of revenue by reportable segments and end markets and major products and regions can be found within the shareholder letter and slides.
Switching to the balance sheet. KLA ended the quarter with $2.9 billion in total cash, cash equivalents and marketable securities, debt of $5.95 billion and a flexible and attractive bond maturity profile supported by strong investment-grade ratings from all three agencies.
Over the last 12 months, KLA has returned $5.1 billion to shareholders, including $4.4 billion in share repurchases and $711 million in dividends paid, the total capital returns amounting to 160% of free cash flow.
Turning to our outlook now. We continue to estimate WFE to decline approximately 20% to $75 million in calendar 2023 from approximately $95 million in 2022. Our customers' capacity planning remains fluid and indications of end market improvement have limited visibility today. While the timing of a meaningful resumption in WFE investment growth remains unclear, we do see overall demand stabilizing around current business levels for our semiconductor process control systems business. We expect this demand profile to continue through the second half of the calendar year. In particular, we are seeing higher than initially expected investment from legacy customers globally, including in China. We have also received clarification from the US government on the export rules issued last October and can now resume some shipments that we had previously excluded.
Furthermore, we see additional wafer and reticle infrastructure spending worldwide. Our WFE estimate reflects our current top-down estimate of industry demand as follows. In memory, we expect WFE investments to decline by 35% to 40% as memory customers continue to respond to lower consumer demand by adjusting production to bring device supply inline with demand. We expect Foundry/Logic to decline by about 10% overall with legacy investment declining less than the segment overall, due principally to automotive and continued demand for legacy design nodes in China.
Our June quarter guidance is as follows. Total revenue is expected to be $2.25 billion, plus or minus $125 million. Foundry/Logic is forecasted to be approximately 77%, and memory is expected to be around 23% of semi PC systems revenue. Within memory, DRAM is expected to be about 85% of the segment mix and NAND approximately 15%.
We forecast non-GAAP gross margin to be 60.75%, plus or minus one percentage point, due primarily to the expected product and segment mix. Given the view of a stabilizing demand environment for the remainder of the year, non-GAAP gross margin should remain in this range with the expectation of gross margins to be between 60% and 61% for calendar 2023, with product mix being the largest factor in quarter-to-quarter variability.
Looking ahead, we will continue to manage costs carefully. The June quarter always represents the first full quarter of our annual salary adjustments. As a result, operating expenses will tick up slightly to approximately $540 million. We continue to see operating expenses trending down for the remainder of calendar 2023, exiting the calendar year in the $530 million to $535 million range.
Other model assumptions for the June quarter include; other income and expense net of approximately $58 million and an effective tax rate of approximately 13.5%. Finally, GAAP diluted EPS is expected to be $4.47, plus or minus $0.60 and non-GAAP diluted EPS of $4.83, plus or minus $0.60. EPS guidance is based on a fully diluted share count of approximately 137.5 million shares.
In conclusion, after three years of strong industry growth, our view of total WFE demand remains unchanged at down approximately 20% in calendar 2023. Against this backdrop, KLA is well positioned to continue to outperform the industry, building on the increased market relevancy delivered in calendar 2022.
Looking ahead, we remain confident of the secular trends driving long-term semiconductor industry demand and investments in WFE are intact. Broadening semiconductor demand, the increasing strategic role semiconductors play in influencing national industrial policy and simultaneous investments supporting growing semiconductor content across technology nodes remain catalysts for growth.
Technology investment and node transitions reflect the value that semiconductors and our industry have a lowering cost for our customers and enabling a broader application universe for semiconductor-based technology across multiple end markets. For KLA, while the global economy and semiconductor industry faced headwinds in 2023, we are well positioned to deliver strong financial performance driven by the relative strength of our Semi PC and SPTS businesses and continued growth in Services.
We will continue to focus on innovation as we execute our portfolio strategy to support our customers' technology road maps and multiyear investment plans. With the KLA operating model guiding our execution, we will execute our strategic objectives and drive outperformance. These objectives drive our growth, consistent operational excellence and differentiation across the diverse product and services portfolio. They are also the foundation that sustains our technology leadership and competitive differentiation. This has enabled us to achieve industry-leading financial and free cash flow performance and deliver consistent and growing capital returns to shareholders.
And with that, I'll now turn the call back over to Kevin to begin the Q& A session. Kevin?
Kevin Kessel
Thank you, Bren. Chelsea, can you please provide the instructions for Q&A, and then begin the Q&A?
Question-and-Answer Session
Operator
Yes, sir. [Operator Instructions] Our first question will come from Harlan Sur with JPMorgan. Your line is open.
Harlan Sur
Good afternoon. And great to see you had another year of strong share gains from the team last year. You reiterated your full year WFE outlook at down 20%. You also talked about your process control business remaining stable at the June quarter levels through the remainder of this year. I'm wondering if the stable outlook also reflects the stabilization of cancellation and pushout activity from what I assume has been a pretty volatile bookings environment over the past six months?
Bren Higgins
Hey Harlan, thanks for the compliment. On -- overall, from a bookings point of view, look, the customers are still moving things around in terms of backlog and slotting. There was some scrubbing in the quarter of some adjustments, fairly minor, in our overall backlog in our RPO number, which you'll see, which is the remaining performance obligations, you'll see in our 10-Q filing that we'll do in the next day or so, came down about $600 million.
So, that implies that the book-to-bill was a little bit less than one, and then there were some adjustments overall. But some timidity in scheduling, but just over the prepared remarks, we do see a stabilization around these levels as we look out over the next few quarters.
Harlan Sur
Perfect. Thanks for that. And then on your EPC franchise, this -- it's driven pretty strong growth, right, 10% to 11% CAGR over the past three years, that's including Services. It even grew 7% last year, right, in a slower consumer environment.
Coming into this year, though, you guys are already driving an EPC systems profile of down about 20% year-over-year. Do you still anticipate the EPC business to grow this year, to outperform WFE growth? And sort of at a high level, how are you thinking about EPC profile second half versus first half?
Bren Higgins
Yes, it's a great question, Harlan. And certainly, over the last few months, we've seen a shift in our expectations for that business. It tends to be short lead-time and very consumer sensitive, if you will. And so as the consumer markets have yet to really recover, we were expecting to see a bounce back in the second half.
And while I expect the second half to be a little bit stronger than the first half -- and this is really regarding the PCB business, flat panel business and the ICOS component inspection business because SPTS has a different profile, I'll talk about that in a second.
But in those businesses, we expect it to increase and improve modestly into the second half, but that we're likely to -- in that segment that will -- it will be a decline year-over-year that's more than what we expect out of the WFE-centric businesses.
SPTS on the other hand, has had a nice growth trajectory. We had a strong year last year and would expect to see that business be somewhere flat, maybe modestly up this year. It is very exposed to the automotive market, specifically around power semiconductors and some of the new specialty substrates. And so there are opportunities for us there. We're pretty pleased with how we're -- how that business is progressing here despite the weakness overall in WFE.
Harlan Sur
Well perfect. Thank you.
Operator
Thank you. Our next question will come from C.J. Muse with Evercore. Your line is open.
C.J. Muse
Good afternoon. Thank you for taking the question. I guess first question, surprised you haven't changed your foundry WFE outlook for 2023 at all. Many of your peers discussed modest adjustments there. So, would love to hear your thoughts as to what's offsetting that?
And as part of that, can you speak to the lead-times for optical inspection, which I still think are well beyond 12 months? So, is that the kind of the key to the story for KLA where you're finding this sustainable level at the June level in the second half?
Bren Higgins
Yeah, C.J., in the overall business, we're seeing more strength than we had expected originally in the legacy parts of the market, so greater than 28-nanometer, and that's a global statement. China is also stronger in terms of expectations there from a legacy point of view. So while we've seen some adjustments in the leading-edge expectations, we've seen some strengthening overall legacy. So, obviously, there are some error bars around these percentages as we look out from the March quarter. But that's really what's driving our outlook here.
C.J. Muse
Great. And then maybe just to follow-up on the legacy part. You talked about native China being 25% of process control. How much of that is silicon wafer versus just traditional front-end equipment?
Bren Higgins
So over the course of the -- if we just take an annual perspective and think about it, I would say the silicon wafer part is probably -- and this is an estimate, probably about 20% to 25% of it. So the other thing -- optical inspection. You asked about lead times on optical inspection. I'm sorry, I left that out of your -- the first part of your question.
So lead times on optical inspection are still pretty long. There hasn't really been a change there as we are adding new capacity to support demand. Customers are still investing in their technology road maps, and that product is pretty essential to that. And so we continue to see an environment where demand is outpacing supply. So in the down WFE market, I expect the high-end optical inspection to grow this year, given those dynamics.
C.J. Muse
Fair enough. Thank you.
Operator
Thank you. Our next question will come from Vivek Arya with Bank of America Securities. Your line is open.
Vivek Arya
Thank you for taking my question. I'm curious what's giving you the confidence that sales have bottomed when many of your memory customers still appear to have a lot of inventory and are unclear when their utilization will pick up. So specifically, how is your visibility to the memory demand for the back half of this calendar year? Do you think it will be about this level, it'll be lower, above this level? Because I noticed that in June, the implied memory sales seem to be picking up, albeit of small numbers. So just any comments on how you're thinking about memory demand recovery from here as it pertains to what you think about utilization at your key memory customers?
Bren Higgins
Sure. It's a good question. If you look at the March quarter, it was pretty low, right, at 14%. So -- and I look back -- and you go back in any of our recent history hasn't been that low really ever. So -- and even as you see it progress through the year into the guidance, the 23% that we talked about in June and even as it sort of stays in that range as you move through the second half of the -- for the year, it's still -- while second half might be a little bit stronger than the first half, given how low the first half was, it's still pretty low overall in terms of our forecast and expectations. And there's some wildcards around how customers ultimately spend.
We tend to be more technology-centric, and so there's still a road map investments that's happening that we're participating in. There's also some opportunities related to the clarification of some of the export controls and what that means in terms of some incremental opportunities to support some of the older generation memory devices in China. And so that clarification that we received from the government will enable the second half shipments. And so that's in our outlook as well.
Rick Wallace
Yes. Just to add to that, if you look at the business that we have, it's more tied to capacity and memory, that's not really showing up. What's showing up, as Bren said, is more on technology.
So, even as those customers or not -- or even have a low utilization, not adding capacity, they are very motivated to continue to work on technology development that plays to -- as Bren said, it's a relatively small number, but there's some stability in that.
Vivek Arya
Got it. And from my follow-up, I realize it's early, but I thought that given that you have long lead-times and you are engaged in the technology side with many customers, you probably have a decent view of how the calendar 2024 might look like.
So, I'm not asking for numerical guidance, but what's your gut right now that is WFE likely to grow next year? Is it supposed to be flat or down? Like what could be just the kind of qualitative puts and takes as we start thinking about WFE next year?
Rick Wallace
Yes. Obviously, just to start off with the obvious, we don't have a lot of visibility into next year. But we can tell you about the conversations we're having with customers, which have to do a lot with their view that things are kind of stabilizing at this level for the most part.
And in some cases, it's because things are down quite a bit, but there's a lot of activity still in, for example, advanced logic nodes or advanced foundry nodes, of design starts and a lot of work going on there. And we're still having conversations about supporting projects that are due to happen at the end of this year or early into next year.
So, if you had to pin us down on it, I think we're kind of -- at these kind of levels, plus or minus, for a while. And hopeful that during calendar 2024, we'll see some recovery, but it's obviously too soon to know that. But I think that that's the general way we're thinking about it going forward.
Vivek Arya
Thank you.
Operator
Thank you. Our next question will come from Krish Sankar with Cowen. Your line is open.
Krish Sankar
Yes, hi. Thanks for taking my question. The first one, Rick or Bren, you spoke about resuming some shipments to China. Can you quantify in terms of millions of dollars, how much that you're going to expect to recoup in the second half? And is that baked into your view that revenue will stay around these levels into the calendar second half?
And along the same path, this China shipment assumption is tied to kind of lagging as memory, and I'm kind of curious, what exactly you mean by lagging as memory because I thought memory is always at leading edge? And then I have a follow-up.
Bren Higgins
Yes. Krish, so we expect to be somewhere greater than $200 million in terms of the opportunity in the second half. And we're working with the customer to make sure that we have what we need to be able to support that activity. But that's how we're sizing it right now overall.
So, look, I think on the technology question is that not everyone is at the leading edge. And so there's activity that's happening in legacy markets, and there's some market opportunities out there from an end market point of view to support some of these investments. So, that's what's driving that investment. And like I said, we see it somewhere in that couple of hundred million range.
Krish Sankar
Got it. Got it. Super helpful. And then a quick follow-up, should we still expect your service revenues to grow this year? And how to think about the service between the Semi and the EPC portion?
Rick Wallace
Yeah, this is Rick. So yes, we should see growth in Service. And I think this is one of the differentiators for KLA is how our Service behaves and slow down. We're seeing a lot of interest from our customers to keep that capability. So even when capacity might go off, what customers want to focus on is yield and making sure that they're continuing to develop new technology. And so that plays to our strength. Obviously, we talked about some of the slowdown we've seen in EPC. So this is much more about Semi process control. But yeah, we're still modeling the growth that we've talked about in the past for Service, and that's a big part of our value that we provide for our customers. So we feel good about where we are there.
Bren Higgins
Yeah. And for the Semi PC part of the business, given the reduction or the softening in the industry environment, some ideally that capacity, the dynamics around the memory business that people have already asked about, I wouldn't expect Service to grow in line with the long-run target of 12% to 14%.
As we said last quarter, we see it somewhere in the mid- to high single-digit growth rate this year, obviously some headwinds from the export controls as a factor in that. But still growth, to Rick's point and on the EPC side, the EPC side, probably flat, maybe modestly up a little bit. Service business behaves a little bit differently. There are some long-term opportunities for us to try to drive that business over time given our global footprint. That's obviously a longer-term play. But the Service business generally is not declining, but not growing a lot this year.
Krish Sankar
Got it. Thanks, Rick. Thanks, Bren.
Operator
Thank you. Our next question will come from Joe Quatrochi with Wells Fargo. Your line is open.
Joe Quatrochi
Yeah. Thanks for taking the question. Just a first of clarification. For the clarification on export restrictions that you received, that $200 million you're thinking about for the second half of this year, did that reenter your backlog or RPO this quarter?
Bren Higgins
Never came out. Because it was a clarification issue, so we were -- as I've said in prior quarters, until we had certainty, we weren't going to scrub out anything out of our backlog. In this case, we required a clarification. And so until we had certainty, we left things in. So no change from that point of view.
Joe Quatrochi
Got it. Thanks. And then as a follow-up, on the gross margin side, how should we think about inventory reserves for the rest of this year? And then can you just remind us how do we think about the timing of those reversals?
Bren Higgins
Yeah. I think the last couple of quarters, we've had some meaningful adjustments from what we were driving the company to the current demand levels. And if you recall back in 2021 and 2022 given the supply chain shortages that were out there, we were making fairly significant commitments in our supply chain that in a lot of ways, drove the performance that we saw in 2021 and 2022 from a growth point of view, and particularly from a relative growth point of view. So as we've had to adjust down to different demand levels at a fairly quick pace, it has driven some incremental reserves related to just excess supply.
So what I would expect within this happening is, over time, as we see a meaningful resumption in demand given the extendability and lifetime of our platforms, the strength of our Service business will ultimately consume those parts. It's not like you throw the parts away. It's just you have more than you need for the demand window in terms of how you see the assessment.
So on a go-forward basis, I expect it to normalize and not be an issue for us. EPC was a bit of a surprise, as I mentioned in the prepared remarks this quarter. And that was really driven by just this weakening overall expectation into the second half that we previously thought we'd see stronger demand. But we think that we've adjusted now and so the impact moving forward, assuming the outlook that we provided normalizes and isn't an incremental factor one way or the other.
Joe Quatrochi
Perfect. Thank you.
Operator
Thank you. Our next question will come from Atif Malik with Citi. Your line is open.
Atif Malik
Hi, thank you for taking my question. I have two questions on China. First, is the number of customers you're engaged domestically in China on trailing edge higher this year versus last year or the year before?
Rich Wallace
I wouldn't say higher, no. But there's a lot of projects.
Bren Higgins
I mean, I – but yeah, Rick's right. I wouldn't say higher.
Atif Malik
Okay. And then on multinational companies in China, Rick, in your discussions with these companies, how are they looking at their future capacity expansions given that the license period for the export restrictions is coming due in September, October? I mean, how are they looking strategically on investments in China?
Bren Higgins
Well, it's hard enough for us to get the clarification. I think for them, that's – they're working on the same thing as getting clarification on exactly what they'll be able to do. So I think there – they have conversations with us, but frankly, the discussions they're having that matter the most to them are not with us. We're able to support them no matter, which way that goes. But I think that's something they're all working through. And there's some stuff in the press about it, but you can imagine that there's a fair amount of anxiousness around that.
Atif Malik
Understand. Thank you.
Operator
Our next question will come from Timothy Arcuri with UBS. Your line is open.
Timothy Arcuri
Thanks a lot. Bren, I had two. So first, I'm just trying to tie your process control systems commentary to WFE. And it sounds like Orbotech systems, I mean, you're not exclusively saying this in June, but it sounds like they're pretty flattish. So process control systems have to be about 15.50, down maybe $175 million from March.
And then in the shareholder letter, you're saying that it's going to remain flat into the back half of the year at that level. So if I just take the 17.20 you did in March and then I take the 15.50 in June and I flatline that, and I used $75 billion this year in WFE, that implies you're like 8.5% this year for WFE share, that's -- I mean, that's a record high.
So I guess the question is, is there something structural going on that you think there's staying power to where your WFE share could stay that high? Usually, I think, six in the trough and eight in the peak, but you're sort of like 8.5, or maybe is it that your $75 billion numbers too low?
Bren Higgins
Tim, I'm not – we do this every quarter. I'm not going to guide the individual segments, but your math is reasonable. And again, with our comments around stabilized, it's plus or minus relative to the current business levels. But that's how we see things moving forward now.
In terms of your -- and we talked about this a little bit over the last number of months is that we felt pretty confident about our ability to maintain our share of WFE that there were drivers in terms of as we look at 2023 and you see customers continuing to invest in their road maps. Particular product lines that are inflecting some of the fastest growing product lines and overall WFE would be factors for growth for us.
Our exposure to the bare silicon or the silicon wafer industry is a driver of WFE that we're exposed to that others aren't. The infrastructure investment that's happening in China from a wafer and reticle point of view is also an inflection point.
I think what's exposed to export controls overall as a percent of the total for us is a little bit lower than some of the other peers. And then finally, we're seeing a very strong share performance overall, as we talked about in the prepared remarks. So when you add all that up -- and share is also important because in a downturn when budgets are limited, customers tend to buy best of breed, and that tends to play to KLA's favor as well.
So when you add all that up, as I've been saying for a number of months, I feel pretty confident that despite all the adjustments out there that folks were making in deferred revenue and partial shipments and all those kinds of dynamics, that we're adding some confusion overall that we feel pretty comfortable about our ability to maintain our share of the overall market.
Process control intensity stronger in a foundry/logic environment and certainly more of the WFE spend is there. And so that's always a factor for us in any downturn. And why -- typically in down WFE years, KLA has I think we might go back even decades, we've always outperformed the market in down years. So I think there's a number of factors that's contributing to it.
Rick Wallace
Yes. Just to build on it, Tim. I think, as Bren mentioned, process control intensity is up some, but I think the share story is maybe even more significant. And then where it's really shown up has been optical inspection. And a lot of that is around relevancy of our optical inspection to some of the new nodes that people are dealing with. And it took a while for some of our customers to really fully appreciate the capability of both the Gen 4 and Gen 5 platforms.
And those two -- I mean, frankly, we're still constrained, we're capacity constrained on those. Those would grow more if we had more capacity. And the reason for that is, I think we are demonstrating to our customers value. And when we thought originally, it'd be mostly logic and foundry, even there, we're seeing some strength, albeit memory is very low. But we're seeing adoption of advanced inspection. So I think that's another way to look at it. If you look at the performance last year overall for process control, I don't think it was an accident, it's relevancy of our solutions.
Timothy Arcuri
Thanks a lot. And then I guess I had a question also on WFE. And some people are trying to get at this, I think. But -- so WFE is still sort of flat in the $75 million range. I think, Bren, you said that that there's $200 million for you that can shift that sort of an add-back of stuff that was banned in the past. So if you're less than 10% of WFE, that's probably like a few billion dollar add back from just from China there, and then there's all this lagging edge stuff happening in China. So is it that the lagging edge kind of stuff -- like it's not helping this year? It's more helping next year? I guess I'm a little surprised that the $75 billion number is not higher just given the massive increase in bookings that we're seeing from lagging edge in China? Thanks.
Bren Higgins
Yes. We're a little -- Tim, we're in April. It's an estimate, an approximation at plus or minus around 77 -- or $75 billion is a way to think about it at this point. So we don't put a lot of extra effort. We focus a lot on running our own business and executing this one.
We just try to do what we can to do an assessment of the overall market, and we'll share that with you. But there are a lot of moving parts, right? We'll get some clarity in terms of ultimately what that impact is. I sized it. Could it be more, could be less? Perhaps, but just overall -- and I think the other factor that could impact this year is just some of the construction dynamics where facilities are being built. And when customers actually receive tools, if you have delays in construction schedules that could affect what shows up when, and there's a number of greenfield projects that are out there. So, a lot of moving parts in it, but we're comfortable with the plus or minus $75 billion, and we'll firm it up as we go here.
Timothy Arcuri
Awesome, Bren, thanks so much.
Bren Higgins
Thank you.
Operator
Thank you. Our next question will come from Sidney Ho with Deutsche Bank. Your line is open.
Sidney Ho
Great. Thanks for taking questions. I want to follow-up with the previous question about -- you talked about the stabilizing demand and maybe a similar profile for the rest of the year. Are you expecting your revenue for the back half of the year to be roughly flat quarter-over-quarter, inclusive of that $200 million of recoup revenue, or are there other factors to consider whether it's on the service business on the EPC side of things?
Bren Higgins
Yes, Sidney, we just did $2.432 billion, right, in -- or $2.433 billion in the March quarter. And so the commentary was focused on current business levels at $2.25 billion. So it might put a little bit of pressure on the second half from a half-to-half point of view. But we are talking about kind of low single digit, low to mid single-digit given that guidance.
And again, we're not guiding the second half. We're just giving a view of this stabilization here. So it's possible, right? It will be close. But I think just given the strength of the March quarter, that it would -- if you end up with roughly the same numbers in the second half, you might be half to half down modestly.
Sidney Ho
Okay. That's helpful. My follow-up question is one of your largest customers in Taiwan talked about higher levels of tool reuse between the 5 nanometers and 3 nanometers. How is this factored into your second half outlook and maybe even the longer-term outlook? And do you think that's anything incremental to what the industry's current level of capacity is used between those? Thanks.
Rick Wallace
It's a good question, Sidney. I think that those are always conversations customers have had in terms of when they look at their utilization. And they look at the differences from node to node. I think it is something that is always being evaluated. They're always trying to optimize the portfolio. The work that we've done in modeling our 2026 plan and the work that we do even looking through the rest of the year and next year, have contemplated all of that. So there's nothing really in there that's new from our perspective about the amount of consumption of process control and process control intensity. It does highlight the need for us to continue to invest in R&D and bring out new capabilities and continue to support our customers. So, nothing really new in what we see in those statements.
Sidney Ho
Okay. Thank you.
Operator
Thank you. Our next question will come from Toshiya Hari with Goldman Sachs. Your line is open.
Toshiya Hari
Thank you so much for taking the question. I had a follow-up question to Sidney's question. Given the depth and breadth of design start activity you're seeing in the leading edge foundry space. What are your expectations for process control intensity into 2024? Is there a bias potentially to the upside from where you are in 2023?
Bren Higgins
Well, look, Toshiya, we -- process control intensity has been very strong for the reasons you talked about, if you think about the number of design starts and what that means in terms of our customers managing a number of different designs that test design rules in different ways and then having to deliver yielded wafers in fairly tight market windows.
It all drives a higher level of inspection and metrology. You also have different process flows and process points that are expected to. So those are all -- have been drivers for process control. As the design starts at the previous node, it was also a factor. And then new tech, right, new tech with the introduction of more EUV to drive scaling, but also more layers here moving forward.
So those are all positives for us. Also, depending on the mix of the revenue, die size is also a factor. So if you end up with exposure to markets with larger die, you put more risk with the same defect density, so that creates a driver for process control as well.
So there are a number of factors. We feel pretty -- if you just back up and look at the overall share of the market, as it relates to Foundry/Logic, we've seen an inflection here, and we think that we can sustain that inflection as we move forward.
Toshiya Hari
Got it. That's helpful. And then, as my follow-up, I think you commented specifically on China as it pertains to your business with wafer suppliers and reticle suppliers as well.
But curious on a global basis, how big are those businesses today? And how should we think about sustainability over the next 12 months or so, again, on the wafer side as well as both merchant and captive reticle customers? Thank you.
Bren Higgins
Yes. Most of the reticle infrastructure -- new infrastructure is being added in China to support legacy activity, and that's probably a driver of an incremental couple of hundred million or so of revenue for us. Overall, wafer -- and I'm separating this way, because I don't want to double count.
But overall, wafer should grow meaningfully this year compared to last year. And it's a pretty sizable business for KLA. So I don't want to -- we haven't broken it out before, but we're an expensive or a big part of the CapEx for wafer suppliers, and we would expect to see that growing this year.
Toshiya Hari
Thank you.
Bren Higgins
Thank you.
Operator
Our next question will come from Joe Moore with Morgan Stanley. Your line is open.
Joe Moore
Great. Thank you. You talked about kind of qualitatively about Services not being down this year, maybe up a little bit this year. Can you talk about the utilization impact on that? And as you see utilizations coming down in both Foundry and Memory, I guess I would think that has less impact on you than it does for some of the other guys. But can you just talk to how utilization might weigh on that number?
Bren Higgins
The utilization rates have clearly come down, particularly in the Memory space. It seems like they are fairly stable at this point. We don't see them continuing to decline from where they are. So -- and that's why we see the overall revenue, because customers are not running the tools to start or in some cases, idling capacity. So you don't have the opportunities -- the service opportunities we would have in a higher utilization environment.
So that's what's driving the overall growth rate down from what a normalized or our trend line expectation is. But we're not seeing it really getting worse at this point, and there are pockets from time to time of improvement. So I think it's -- stabilization is the right word, is why we chose to use it, but it feels like that's really what we're seeing today.
Joe Moore
That's helpful. Thank you. And then separately, on China, you guys have talked to the sort of China trailing-edge logic opportunity a couple of different times here. Your sense for whether there's building ahead there. I mean, I would assume you have customers there that have anxiety about future export controls. Could they be putting in capacity? I guess maybe a different way of asking the question, do you see utilization that kind of validates the requirement of the spending, or do you worry that it could be a building ahead of supply?
Rick Wallace
Yeah. It's possible. I mean, we don't have great clarity on all of it, but it does seem unlikely given the recent history of when you've lost support of equipment provider, the tools aren't very useful. So I think the expectation is the controls will remain on the leading edge, and they'll be able to continue to develop some of these mature technologies.
Remember, there's a very active EV market in China. So there's a lot of need for some of that more mature technology as it applies to some of those markets. So it does seem to be based on some real demand around things that are not leading edge, and that's really what we're seeing and have for quite a while in China. So it doesn't feel like it's necessarily that. There are companies that are ramping up. And in that sense, they might not have won the markets that they hope to win yet, but we've kind of factored that into our overall forecasting for China anyway.
Joe Moore
Very helpful. Thank you.
Operator
Thank you. Our next question will come from Blayne Curtis with Barclays. Your line is open.
Blayne Curtis
Hey. Thanks for taking my question. I was curious, I mean, you talked about in the outlook, legacy growing faster than leading edge. Just curious if you could give us a perspective where that mix is within Foundry/Logic today? And maybe a perspective of where it's come from?
Bren Higgins
Well, so it's declining less. It's not growing. It's really just declining less in terms of the overall outlook. I mean for KLA, if you just thought about what's less than 28 nanometers versus what's above in our mix profile, you have about or 60% of our revenue is we'll call it less than 28-nanometer, and so about 40% of it is above. And then normally, it's closer to 75% leading, 25% lagging. So to give you a sense of it being a bigger part of our mix this quarter.
And it's broad-based and certainly, China is a pretty big factor in all, but you also have a fair amount of investments happening from the analog guys and supporting some of the automotive markets, sensor investment, some industrial markets and so on. So that's -- there's steady investment in these earned markets where semiconductor content is rising, and so you're seeing more investment in those areas that we frankly didn't ship a lot into over the last couple of years given the strength of demand at the leading edge and our largest customers, given the supply-demand imbalance taking most of the slots.
So in some ways, as we've seen the leading edge adjust, and this is a logic and memory statement, we've seen some adjustments in our largest customers over the last six months or so and into this year, some of that capacity is getting consumed by folks that wanted earlier slots, and we weren't able to deliver to them.
Blayne Curtis
Thanks. And then I wanted to ask you on the inventories on the balance sheet. I think it's a record level -- near record in data as well. So I guess kind of everybody has this phenomena going on. How are you thinking about managing that the top line kind of flat to down? I'm kind of curious if inventories will still grow and any impact on gross margin as you work it down?
Rick Wallace
Yeah. And I've said this many times, but we're not the company that you look to for asset velocity as it relates to inventory. And there's a reason for that is it starts with the business model the KLA has around driving innovation and differentiation and that drives a fair amount of custom componentry into our systems, and very unique supply relationships where our suppliers are trusted partners more than a transactional supply chain. As a result of that, what we optimize for is we optimize for that differentiation. And what we accept is we accept that we're going to need to make commitments. Lead times are long, we're going to take parts when we put orders out to take them.
And in the long run, we believe that economically, we're in a pretty good place that given the strength of service, extendability of the platforms, that we'll consume the parts that we're buying against our volume products. So we've seen it trend up, and it's trending up, I'd expect it to start to flatten out, maybe drift a little bit. But I'm already starting to buy parts for new products that are coming out for things that will have some unique parts for new products that will be coming out over the next 12 to 18 months or so. So I don't expect it to turn very much.
That's why even in these very strong upturn environments. We've rarely gotten above -- much above two times from an inventory term point of view. So we'll continue to manage it, but it's sort of fundamental to our supply chain strategy. And as a result of that, when you're buying parts to support products that are -- they are living for 20 to 30 years, there's a lot of that buy to support that, and we carry it.
Blayne Curtis
Thank you.
Operator
Our next question will come from Brian Chin with Stifel. Your line is open.
Brian Chin
Hi, there. Good afternoon. Thanks for asking the question. Maybe for Rick, trailing edge clearly is sort of as less process control intensive. But I guess to what extent does the immaturity of these production lines, particularly in China a lot of greenfield situations and also the desire for faster time to market, how do these factors kind of counteract that typical kind of lower intensity for trailing edge?
Rick Wallace
Well, I think that -- a couple of ways. One is it depends on the applications for the fabs. So if you're an automotive fab, you actually have a different kind of need for process control than you do if you're just a traditional legacy fab. So that's one thing.
The -- that actually process control intensity can be a little bit higher. And then depending on the scale and the size of the fab on a relative basis, it's harder to have you get more efficiency on a large fab. And so these fabs tend not to be as mega fabs, and then you actually get a little bit of intensity as a result.
They're also looking for solutions that have been proven in the market. And so for us, those are established product lines that we've been supporting for a long time that might not need as much advanced application support. So those are all factors that I think both good for our customers, but also a good business for KLA. So yes, it's not as intensive as a leading-edge fab, but they still have a ways to go to catch up. And there's always value in getting higher yield. And whenever they change process nodes, we see interest in upgrading their process control.
Brian Chin
Great. Thank you. And maybe just a quick follow-up. In terms of the percent of memory increasing in the June quarter -- and it looks like also on a dollar basis as well, I think you suggested it's pretty focused towards DRAM. Can you characterize the nature of that uptick, or is this more of a kind of a classic case of coming off such lows in March that this is really more of a bouncing along a bottom kind of situation?
Bren Higgins
Yes, I think it's more of the latter. I wouldn't characterize it as anything other than just some investments that some timing of -- I think tool deliveries with our customer base, and it's very technology-centric. So I wouldn't characterize it as given the level of it. It's been a while since it's been this low even with the uptick quarter-to-quarter. It's pretty technology centered with the exception of -- some of the China opportunities.
Brian Chin
Got it.
Bren Higgins
Thank you Brian. Operator, we have time for one last question.
Operator
Our last question will come from Mehdi Hosseini with SIG. Your line is open.
Mehdi Hosseini
Yes. Thanks for taking my questions. Just two follow-ups for me. If I just take your commentary regarding the revenue trend first half and second half of the calendar, it seems to me that the peak to trough decline in revenues in the 25% to 30% range. And I'm not asking you for a guide. But what I wanted to better understand, if you did close to $3 billion in December of 2022 with a WFE in the $90 billion to $95 billion. Can you go and hit those revenue run rate without WFE – if no WFE having to go to $90 billion does your diversification looking forward, especially with semiconductor material and others, would enable you to hit $33 billion without having WFE to go to $90 billion plus? And I have a follow-up.
Bren Higgins
Yes, Mehdi, I mean, one of the things – and this ties back to the rising share of WFE that we've seen over the last couple of years is that we're gaining share of the overall market, so we should be able to do more revenue, lower WFE levels as that sustains.
Now there are mix dynamics and other factors that affect it. But given the dynamics that have driven and we believe there's a fair amount of sustainability to it. There are new products that we believe can continue to solve problems for customers. We have exposure to markets that are inflecting and are pretty critical to the scaling road maps out there.
So -- and our share, we improved share by almost 300 basis points. And that's a lot in one year. We talked a lot about half point to one point a year in terms of our objectives. But we do think that, that is a clear indicator of the differentiation that we have. And if we're able to be successful with some of the new products that are coming and the mix generally stays as we talked about at our Investor Day of 60-ish percent foundry/ logic in terms of overall mix of WFE that there's an opportunity for us to continue to grow our share opportunity.
Mehdi Hosseini
Okay. And then just one quick follow-up. If any of your customers were to reuse some of the equipment, how should we think about price diagnostic content for that application?
Bren Higgins
Well as Rick said earlier, this is nothing new that customers are always looking to optimize their capacity, given what this equipment cost and the amount of investment they're making, they're always looking to do that. And there are certain product types where there are -- there's more opportunity than others.
It was easy for customers to reuse capacity when they only had a very limited number of designs and no major technology drivers. But as you look out going forward, given scaling dynamics and increase in EUV layers, I think that there's a technology element that will drive our customers to continue to upgrade their capabilities.
But I am sure they will look for opportunities if in the long run, they believe that there's a sustainable drop in the wafer start requirement to try to relocate that capacity or try to reuse it. You can't move it overnight, right, particularly if you're moving it to a different facility. These tools have to be disassembled, they have to be shipped and reassembled and then calibrated and brought up. So, those tend to be longer term decisions.
So, structurally, they have to feel pretty good about the longer term setup for that fab or at that node to move the equipment. What they typically do in the short run is they idle capacity if they don't need it for a period of time, but with an expectation that it will come back online.
And given the design start environment at seven and five, it's really -- there's still a fair amount of designs out there that is just volumes are low. So, we'll see how it plays out. But nothing new. And as Rick said, it's modeled in our view of growth in KLA opportunity moving forward.
Mehdi Hosseini
Okay. Thank you.
Kevin Kessel
Thank you, Mehdi. And thank you, everyone, for your time today for -- we know it's busy earnings season. I appreciate it. We'll be seeing many of you at some of the upcoming conferences. And with that, I'll turn the call back over to Chelsea, so she can provide any final instructions.
Operator
Thank you, ladies and gentlemen. This does conclude the KLA Corporation March quarter 2023 earnings call and webcast. Please disconnect your line at this time, and have a wonderful day.
